Theragun PRO Plus

What's Included

• Theragun PRO Plus Device
• Built-in LED light therapy
• Built-in Biometric sensor
• 5 attachments: Standard Ball, Dampener, Thumb, Wedge, Micro-point
• Heat therapy attachment
• Vibration therapy attachment
• QuietForce solution
• USB-C charging cable
• Travel pouch

Dimensions
36mm x 154mm x 65mm without attachments

Weight
1.65kg without attachments

Battery Life
The battery life of the device depends on the attachment being used. The general battery life is about 150 minutes, but this can decrease based on the attachment used.

Material
The device's housing is made of plastic and TPU. The soft attachments are made of PU foam and silicone. The active attachments (Heating and Vibration) are made of silicone to cover their internal components.

Warranty
2-year warranty

Turning on your device


Firmly press the center button to turn on the device. The device’s TFT LCD screen will light up when the device is on. You can select Quick Start or toggle through a variety of treatment routines using the up and down buttons. Press the center button to select your treatment. Move the Theragun PRO Plus device back and forth over the area you’re treating and experiment with different amounts of light-to-moderate pressure on your body. Do not start by putting pressure directly on an area of discomfort. Instead, work slowly around the area to reduce tension. 



Adding attachments


Ensure that the device is powered off before connecting or removing any attachments. Line up the white dot on the device with the white dot on the attachment. Insert the attachment into the device arm, twist and lock into place. To unlock and remove the attachment, twist in the reverse direction and pull it off.

Infrared LED light therapy
To add infrared LED light therapy to your routine, toggle to the infrared LED light indicator. Short press to turn the infrared LED light therapy on and short press to turn it off. Infrared LED light therapy is most effective when applied directly to the skin. Infrared LED light therapy can be applied to the treatment area simultaneously with percussive, vibration and heat therapy. To maximize your treatment benefits, use for approximately 90 seconds on each treatment area. Infrared LED light therapy will not turn on during cold treatments. 


Vibration therapy


To add vibration therapy to your routine, connect the vibration attachment to your device. 



Heat therapy


To add Heat Therapy to your routine, connect the Heat Therapy attachment to your device. Short press the right button to toggle to the heat indicator. Short press the up button to increase the heat temperature and short press the down button to decrease the heat temperature. There are three hot temperature settings.



Biometric sensor


To use the device’s biometric sensor, hold the device in the ”double-grip” position while keeping the tip of your pointer (index) finger placed on the biometric sensor. Cover the entire sensor with the tip of your finger.